User's Manual

There are two ways to assign an IP address. You can either obtain an IP address automatically

or specify an IP address.

If you want to obtain an IP address automatically

4. Check the radio button for Obtain an IP address automatically.

5. Then you have to assign Domain Name System (DNS) server’s IP address. Two

methods are available: automatically obtain an IP address or manually specify an IP

address for DNS server. If you can obtain DNS server address automatically, check the

radio button for Obtain DNS server address automatically and proceed to step 10.

Or if you can configure a DNS server address, then proceed to step 9.

If you want to specify an IP address manually

Contact your network administrator first to obtain a valid IP address for you to use. This IP

address must be a unique address in the range of addresses that are available for your

network.

6. Check the radio button for Specify an IP address. In the IP address box, type the

assigned IP address. The default IP is 192.168.1.1.

7. In the Subnet mask box, type the subnet mask of your network. The default is

255.255.255.0.

8. In the Default gateway box, set the gateway address. The default is 192.168.1.254.