User Manual
Table Of Contents
- Cisco Model DPH650 MoCA to Wireless Adapter User Guide
- IMPORTANT SAFETY INSTRUCTIONS
- FCC Compliance
- Introducing the DPH650
- What's in the Carton?
- Front Panel Description
- Back Panel Description
- System Requirements for the DPH650
- Where Is the Best Location for the DPH650?
- How Do I Mount the DPH650 on the Wall?
- Connecting the DPH650 for Wireless Networks
- Configure the DPH650
- Configure TCP/IP Settings for Your PC
- Having Difficulty?
- Tips for Improved Performance
- How Do I Renew the IP Address on My PC?
- Notices
- For Information
16 4027494 Rev A
How Do I Mount the DPH650 on the Wall?
How Do I Mount the DPH650 on the Wall?
Before You Begin
Before you begin, choose an appropriate mounting place. The wall can be made of
cement, wood, or drywall. The mounting location should be free of obstructions on
all sides, and the cables should be able to easily reach the DPH650 without strain.
Leave sufficient clearance between the bottom of the DPH650, and any flooring or
shelving underneath, to allow access to cabling. In addition, leave enough slack in all
cables so that the cable modem can be removed for any required maintenance
without disconnecting the cables. Also, verify that you have the following items:
Two wall anchors for #8 x 1-inch screws
Two #8 x 1-inch pan head sheet metal screws
Drill with a 3/16-in. wood or masonry bit
A copy of the wall-mounting illustrations shown on the following pages
Mounting Instructions
You can mount the DPH650 directly on a wall using two wall anchors, two screws,
and the mounting slots on the bottom of the modem. The modem can be mounted
vertically or horizontally. Mount the modem as shown in the following illustration.