User Manual

file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/tut_repeater.html

add one more Bridge in this fashion. If you add more than one Bridge in a chain, you will begin

to lose network quality and speed.

Note: If the WDS channel of the networking device that the access point is

connected to changes, the

Status page will continue to show the old channel

information for the access point. Although the Network list on the

Wireless

page will display the selected network and the correct channel, the change has

not yet been applied to the access point. To update the channel information on

the access point, click Save at the bottom of the

Wireless page.

10. Select or enter any required

Transmission settings that you will need to connect to the

wireless network device.

11. Click Save at the bottom of the page.

file:///G|/CSO/Documentation/Documentation%20-%20Dra...20Mach-1%20AP/User%20Guide/English/tut_repeater.html (3 of 3)10/26/2006 9:47:11 AM