User Manual

file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/lan.html
● Dynamic: Select this option if your access point will obtain an IP address from a
DHCP server on the network.
● Static: Select this option if the access point to have a specific IP address or your
network cannot assign an IP address using DHCP. Enter your new IP Address,
Gateway, DNS Server, and Subnet mask and click Save at the bottom of the page.
When you change the IP address of your access point, you may need to reboot your wireless
clients after the access point reboots with its new IP address.
file:///G|/CSO/Documentation/Documentation%20-%20Dr...ng/5454%20Mach-1%20AP/User%20Guide/English/lan.html (2 of 3)10/26/2006 9:47:09 AM