User Manual

file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/index.html
Reset
Reboots your access point or restores your access point to its factory
default settings.
● To reboot your access point without changing your current
settings, press and hold the Reset button for 1 second.
● To restore your access point to the factory default settings,
press and hold the Reset button for 7 seconds.
15VDC
Connects the power adapter to your access point.
SecureEasySetup
button
Enables SecureEasySetup on your access point.
● To enable SecureEasySetup on your access point, press and
hold the SecureEasySetup button for 1 second.
● To reset your wireless security settings to the factory default
(no security enabled), press and hold the SecureEasySetup
button for 7 seconds.
* Actual performance may vary depending on operating environment and distance between networked devices.
© 2005-2006 U.S. Robotics Corporation
R46.1320.00
rev 0.1 10/06
file:///G|/CSO/Documentation/Documentation%20-%20Dr.../5454%20Mach-1%20AP/User%20Guide/English/index.html (3 of 3)10/26/2006 9:47:01 AM