User Manual
Table Of Contents
- index.html
- features.html
- install.html
- config.html
- client_connect.html
- ses.html
- status.html
- security.html
- lan.html
- wireless.html
- device.html
- tut_ap.html
- tut_client.html
- tut_repeater.html
- tut_bridge.html
- troubleshooting.html
- trouble_cd.html
- trouble_client_comm.html
- trouble_client_comm_02.html
- trouble_client_scan.html
- trouble_locator.html
- trouble_ses_client.html
- trouble_unicast.html
- trouble_wui_access.html
- trouble_connect_speed.html
- trouble_wds.html
- trouble_power.html
- trouble_upgrade.html
- trouble_internet.html
- trouble_ping.html
- support.html
- faq.html
- regulatory.html
- copyright.html
- warranty.html
file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/status.html
This section displays the current wireless security settings for your access point.
● Method: The security method and security settings (Encryption, Pass phrase,
Key, etc.) for your access point. This information can be configured from the
Wireless page.
● Encryption: The security method and security settings (Encryption, Pass
phrase, Key, etc.) for your access point. This information can be configured from
the
Wireless page.
● Pass Phrase: The security method and security settings (Encryption, Pass
phrase, Key, etc.) for your access point. This information can be configured from
the
Wireless page.
● Wireless MAC filter: Displays whether the wireless MAC Filter is Enabled or
Disabled on your network. This information can be configured from the
Wireless page.
Clients
Note: Any devices connected to the access point that have static IP addresses
file:///G|/CSO/Documentation/Documentation%20-%20Dr...5454%20Mach-1%20AP/User%20Guide/English/status.html (4 of 5)10/26/2006 9:47:08 AM