User Manual

file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/status.html
can be configured from the Wireless page.
● Network name: Displays the Network name of the access point that is broadcast
for wireless connections. This can be configured from the
Wireless page.
● Broadcast name: Displays the whether the broadcasting of the network name is
Enabled or Disabled. This can be configured from the
Wireless page.
● Channel: Displays the current channel your access point is using, and any side
channel information in parentheses.
Note: If the WDS channel of the networking device that the access
point is connected to changes, the
Status page will continue to
show the old channel information for the access point. Although the
Network list on the
Wireless page will display the selected
network and the correct channel, the change has not yet been
applied to the access point. To update the channel information on
the access point, click Save at the bottom of the
Wireless page.
● MAC address: Displays the wireless (WLAN) MAC address of the access point.
● WDS restrictions: Displays the status of WDS restrictions on the access point,
either Enabled or Disabled.
● Access Points(s) (Bridge and Range Extender modes only): Displays the MAC
address of the networking device to which the Wireless Nd
1
Access Point is
connected.
● Associated network (Infrastructure mode only): Displays the network name for
the network to which the Wireless Nd
1
Access Point is connected.
Security
file:///G|/CSO/Documentation/Documentation%20-%20Dr...5454%20Mach-1%20AP/User%20Guide/English/status.html (3 of 5)10/26/2006 9:47:08 AM