User Manual
Table Of Contents
- index.html
- features.html
- install.html
- config.html
- client_connect.html
- ses.html
- status.html
- security.html
- lan.html
- wireless.html
- device.html
- tut_ap.html
- tut_client.html
- tut_repeater.html
- tut_bridge.html
- troubleshooting.html
- trouble_cd.html
- trouble_client_comm.html
- trouble_client_comm_02.html
- trouble_client_scan.html
- trouble_locator.html
- trouble_ses_client.html
- trouble_unicast.html
- trouble_wui_access.html
- trouble_connect_speed.html
- trouble_wds.html
- trouble_power.html
- trouble_upgrade.html
- trouble_internet.html
- trouble_ping.html
- support.html
- faq.html
- regulatory.html
- copyright.html
- warranty.html
Wireless Nd1 Router User Guide
Press the SecureEasySetup button on the access point for 7 seconds.
Note: This is not the same as a
restore to factory defaults or a reboot of the access point. The SecureEasySetup
button only affects your wireless security settings.
The SecureEasySetup LED will turn off. The security method and encryption type for your wireless network will be reset
to None. No other settings on your access point will be changed.
* BROADCOM, SecureEasySetup, and the SecureEasySetup logo are trademarks or registered trademarks of Broadcom
Corporation in the United States and/or other countries.
© 2005-2006 U.S. Robotics Corporation
file:///G|/CSO/Documentation/Documentation%20-%20Dr...ng/5454%20Mach-1%20AP/User%20Guide/English/ses.html (3 of 3)10/26/2006 9:47:07 AM