User Manual

14
The Basic Setup tab is the main screen for configuring the Wireless Repeater.
Firmware Version: Displays the current firmware version number.
Name: Displays the name of the Wireless Repeater.
IP Address: Assign an appropriate IP Address for the Repeater.
Subnet Mask: Assign an appropriate Subnet Mask for the Repeater.
Gateway: Assign an appropriate Default Gateway for the Repeater.
Mode: Choose to have the Repeater broadcast in B-Only, G-Only, or Mixed mode.
SSID Broadcast: Choose to Enable or Disable the broadcast of SSID.
Channel: Select the desired channel number.
Wireless Security: Select to Enable or Disable wireless security encryption. To edit
the encryption setting, click on the Edit Security Settings button.
After you have completed the changes, click on Save Settings to apply the changes.