User Manual

11
3. Connecting to the Wireless Repeater
Once you have properly configured the Repeater, your wireless computers should be
able to detect its signal.
Use your wireless network adapter’s utility to detect and connect to the Repeater. You
can identify the Repeater by its MAC Address, which is displayed in the BSSID field of
your wireless network adapter’s utility.
You can check the Repeater’s MAC Address on its Web Configuration screen.
Step 1 Open your Web Browser (Internet Explorer or Netscape), enter the default IP
Address of the Repeater 192.168.1.250 in the Address Bar and press Enter.
Note: If you have changed the IP Address of the Repeater, enter the Repeater’s new IP
Address instead of the default.
Step 2 Enter admin for both the User name and Password fields and click OK.