User's Manual Part 2

1. Click Yes to enable Enable MAC Access Control.
2.
Click Yes to enable the appropriate table, the Grant Access Table or the Deny
Access Table.
3.
Click the Add button, a pop-up window will open, then enter the MAC address of the
network card on the computer that you wish to add to the table.
4.
Click Submit to enter the MAC address into the table.
5.
Click Submit to enable the new table’s entries.
6.
To remove an existing rule, click to select edit beside MAC address.
7.
A pop-up window will open and click the DEL button to remove it.
NOTE:
The Access Control Settings apply to wireless client computers.
Administration Settings
The Administration Settings page allows the user to change the password settings for
administrator access to the Dell Wireless 4350 Small Network Access Point.
Administration Settings
Password Settings
The Dell Wireless 4350 Small Network Access Point uses a password to authenticate the user
before allowing the user access to the web configuration tool or Control Utility.
If you would like to change the current password, click to select Change Your Password and
enter the new password in both New Password and Retype Password fields. Write down the
password and keep it in a secure location for future reference.