User's Manual Part 1

The web-based configuration tool enables you to set up advanced network configuration for
your Dell Wireless 4350 Small Network Access Point. Follow the instructions below to gain
access to the web tool.
NOTE:
Microsoft Internet Explorer 4.0 or higher or Netscape 4.0 or higher must be used for
the web-based configuration tool.
1. Click the Start button, and then click Run.
2. Type the IP address of the Dell Wireless 4350 Small Network Access Point into the Open
box: (for information on obtaining this IP address see
How to obtain the IP Address of the
Access Point).
3. If this is the first time configuring your Dell Wireless 4350 Small Network Access Point, or if
the user name and password have not been changed, type admin in the User Name and
Password fields.
4. Click the OK button. The Configuration screen appears.
NOTE:
Dell technical support representatives do not support the configuration options in the
Advanced Settings portion of the configuration program. These options are
provided for your convenience only. However, the advanced settings are fully
documented and explained in this guide.
Main Menu