User's Manual Part 1

To prevent unauthorized administration changes to the access point, the access point is
password protected. It is strongly recommended that you change the factory default password.
1. Click the To Change the Access Point Password button. The Password Settings
window appears.
2. Type the original password in the Original Password field.
3. Type the new password in the New Password field, and then retype it in the Confirm
Password field to verify.
4. Type the password hint message in the Password Hint Message field.
5. Click the Submit button when you finish the setting. If you want to clear any values you
have entered in any field, click the Cancel button.
Upgrade to New Firmware
If you are instructed to upgrade the firmware, click the Upgrade to New Firmware button. It will
connect to the Dell website to upgrade to the latest firmware release. It is unnecessary to
upgrade the firmware if your access point is working properly.
Diagnostics