User's Manual Part 1

Web-Based Configuration Tool: The web-based configuration tool is for advanced
configuration of the Dell Wireless 4350 Small Network Access Point. It is a tool provided inside
the access point which can be accessed via the web browser on your computer. This tool
includes every basic and advanced configuration option for the Dell Wireless 4350 Small
Network Access Point. For instance, you can enable multiple virtual AP's or disable your
wireless network.
NOTE:
The Setup Wizard and Control Utility must be run on Windows 2000 or Windows
XP computers. Microsoft Internet Explorer 4.0 or higher or Netscape 4.0 or higher
must be used for the web-based configuration tool.
Factory Default Settings:
Dell pre-configures the Dell Wireless 4350 Small Network Access Point with the following
settings:
NOTE:
If you lose track of the device settings, you can reset the router by pushing the reset
button to restore these settings back to your router.
Setting Default
User Name admin
Password admin
AP Host Name Dell_4350_AP
IP Address Static IP address of 192.168.2.2
Subnet Mask 255.255.255.0
ESSID (wireless network name) wireless
Channel auto
Encryption No Encryption
Guest Mode Disabled
NOTE:
Your Dell Wireless 4350 Small Network Access Point comes with factory default
settings that should work for the majority of the network usage scenarios. However,
there are cases where your network environment may require a different
configuration.
Setup Wizard:
Introduction