User Manual

Gemtek Systems Page 51
Factory Default for P360 Access Point
The following settings and parameters are the factory default for “Hot-Spot in a Box” Access Point
model P360.
Default Device General Configuration Settings:
Operating Mode
Operation Mode AP (Access Point)
General Configuration Settings
Host Name P-360
DNS Server Address 0.0.0.0
System Identification identification
Serial Number MAC address of the device (provide on the device box)
Address address
Coordinates coordinates
Customer Name Customer_name
Network Configuration Settings
IP Address assigned by ISP 192.168.2.2
IP Subnet Mask 255.255.255.0
ISP Default Gateway (none)
DHCP Client disable
Wireless Configuration Settings
Access Point SSID P360
Domain World
Channel 11
Encryption Algorithm No Encryption
Antenna Gain in dBi 00 (can vary, depending on wireless LAN card)
Total Output Power (EIRP) in dBm 20 (can vary, depending on wireless LAN card)
Default Advanced Settings:
Firewall Settings
Firewall Function Not enabled
ACL
Default ACL Policy for wireless network Accept
Default ACL Policy for Ethernet Accept
Appendix