User Manual

Gemtek Systems Page 41
Figure 357 – SNMP Settings (1)
The following parameters should be entered to create new SNMP community:
Figure 368 – Add New SNMP Community
Community String – community name for (read-only/read-write) access.
Allow Community Access from IP – IP address/netmask for (read-only/read-write) community.
Allow Mib-view – specify MIB ???
IP address and netmask combination of 0.0.0.0/32 means “ANY” IP address can
connect. Access can be controlled for one specified IP (for example
192.168.2.100/32) or by a range (for example 192.168.2.0/24 for IP numbers
192.168.2.1 to 192.168.2.254).
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxx