User Manual

After entering the command line, click OK.
Expected outcome
The TFTP client should inform of a successful transfer. The upgrade will be
finished a few minutes after this notification, as the upgrade process might take
about 2-3 minutes to restart the system.
Further information
For other means of upgrading Nokia A036, see Upgrading via FTP and
Upgrading via web.
3.2 Upgrading via FTP
Use FTP client software and command line interface to upgrade Nokia A036. The
uploaded file can be a plain image file (system, rescue or MVC), or if the file is
tarred and compressed, more images can be uploaded in a single upload session.
Steps
1. Run your FTP software and input the following information to logon
to the FTP server
<HOST>: IP address o f Nokia A036
<Port>: 21 (port numbe r for FTP)
<UserID>: login name (default login name: root)
<Password>: password of the We b/SNMP (defaul t password:
private)
After connected, upload the new firmware to the current directory.
2. On the workstation, click Start -> Run to open a command window
3. Type the following command to connect to Nokia A036
ftp <IPAdd r ess>
where
<IPAddress> = IP address of Nokia A036
After connected, enter username and password.
Default username: root
Deafult password: private
28 (60) # Nokia Corporation
Nokia Proprietary and Confidential
dn02119532
Issue 1-0 en
Nokia A036 Wireless LAN Access Point User Manual