User Manual

13
MicroCell Status
This table and diagram identify the status indicators on the 3G MicroCell front panel and describe their operation.
MicroCell
3G
Power
Ethernet
GPS
PC
3G
T14082
Status
Indicator
Color/State Description
Power
Off No power.
Red/Steady
MicroCell fault has
occurred.
Green/Steady
Power is on and there
are no faults.
Ethernet
(Broadband
Connection)
Off No connection.
Green/Flashing
*
Physical connection
but no IP address.
Green/Steady
AT&T network
connection.
GPS
Off
Initial state. This
state lasts for several
minutes after power is
connected.
Green/Flashing
*
Searching for GPS signal
and/or location fix. This
follows the initial state.
Green/Steady Location fix acquired.
PC
(PC/Router
Connection)
Off No connection.
Green/Flashing
*
Ethernet link, passing
traffic.
Green/Steady Ethernet link, no traffic.
3G
(MicroCell
Connection)
Off No configuration.
Green/Flashing
*
Initialization is in
process. Flashes may
be short or medium in
length.
Red/Flashing
*
Fault condition(s) present
that impact service.
Green/Steady
MicroCell service
available.
*
If any condition marked with an asterisk persists after 20 minutes, see Troubleshooting on page 15 for additional information.
4030453_RevA_6.75x8.25_Mar6.indd 134030453_RevA_6.75x8.25_Mar6.indd 13 3/6/2009 5:43:34 PM3/6/2009 5:43:34 PM