User's Instructions

app Gemstone Lights HUB from app store.
How to use
1. After connect your Lights, then Power the controller with DC5V/DC12V/24V/ Power Supply
2. Start GemstoneLights Hub App(You could download it from Play Google or Apple Store)
3. Add the controller to your family group, follow the instruction in App, you could do any effect
you could in the app.
4.The default Bluetooth SSID is Gem-mini and no password,use GemstonLights Hub app find out
the signal of our controller, you could use it control your light after you connect it.
Safety and Considerations
1. The product is designed for field installing on an end product or on the wall in accordance with
the National Electrical Code (NEC) (ANSI/NFPA 70), Canadian Electric Code, Part 1 (CEC), and
local codes by a qualified technician.
2. When the controller is installed, AC should be disconnected from all products. No power
should be attached when wiring or installing the lights. After the lights and wires are connected to
the controller, the controller can then be connected to the unpowered driver (power
supply). Complete the install by powering the driver to AC power.
3. The product is not waterproof and is designed for use in a dry environment only.
4. Follow the manufactures requirements for power.
5.If wires or cables are damaged, power off the device and have the unit repaired or replaced.
6. Failing to comply may void the warranty on the system.
RF Exposure Statement
To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and
operated with minimum distance of 20 cm the radiator your body. This device and its antenna(s) must
not be co-located or operation in conjunction with any other antenna or transmitter.