User's Manual

Setting Up
08
GEMLIGHTBOX USER MANUAL | SETTING UP
SUPPORT.PICUPMEDIA.COM
Remove the existing diamond top lid. Position
your GemLightbox Aerial below the lid and
attach the Aerial diamond piece magnetically
to the Aerial turntable from the top of the
GemLightbox lid.
The Aerial will power on automatically,
denoted by the LED light lighting up on the
top of the Aerial.
1
Set up the
GemLightbox Aerial
Connect the GemLightbox Aerial to the
GemLightbox with the supplied power cord.
It is safe to leave your Aerial on and plugged
into your GemLightbox unit. Simply power
off the entire GemLightbox unit after each
photography session. When you next turn
on the GemLightbox, the Aerial will remain
switched on and ready for use.
2
Switch on the
GemLightbox Aerial
Watch How to Setup the
GemLightbox Aerial here: