Portable Karaoke Party Speaker MPA-K650
Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Contents Warning 1 Important precautions 1 Package contents 2 Description of front panel 3 Description of rear panel 4 Description of Remote Control 5 Getting Started 6 The lighting ash with arrowhead symbol, with an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be sufcient magnitude to constitute a risk ofelectric shock topersons.
DESCRIPTION OF FRONT PANEL Package contents 1.Speaker x 1 2.Remote control x 1 3.AC power cable x 1 4.User manual x 1 5.FM Antennax1 6.AUX- in Cablex1 7.Shoulder strapx1 The Satellite Speakers Output Consumed Power : FM: Speaker Size: Speaker Impedance: 17W 87.5-108MHz 6 Inch x 1 3Ω x 1 2 Left&Right Response : 50Hz-20KHz Input Sensitivity: 500mV AC Power Supply: 110-240V Battery: 7.4V/2000mAh 1.Volume Control 2.MIC Volume Control 3.MIC Echo 4.Display Window 5.Mode(function switch) 6.Play/Pause 7.
DESCRIPTION OF REMOTE CONTROL DESCRIPTION OF REAR PANEL 1 2 3 1. Power on/off 2. Mode 3. Mute 4. Volume +/CH5. Previous Track 6. Scan 7. 0-9 keys 8. EQ Function 9. Play/Pause 10. Next Track/CH+ 11. Volume 12. Repeat 1 2 3 1.FM Antenna Jack 2.AC Power Connect Inlet To insert the remote control batteries: 1.Open the battery compartment. 2.Insert 2 x AAA batteries with correct polarity (+/-) as indicated. The 2xAAA battery not include in our products. 3.Close the battery compartment. 3.
Function Instructions Getting Started Connecting Power Cable USB Operation Warning:Ensure the AC/Charge switch is in OFF position before plugin.Plugin the AC connector into the 110-240V 50Hz inlet socket in the rear panel of the unit and the other end into the standard AC 120V wall socket. · 1.Do not plug or unplug the power cable while you have wet hands. 2.
Connect with AUX Line in Connect with Wired Microphone Connect to Wired Microphone Connect with AUX Line in 1.Press【MODE】Button on the Top Control panel or on the remote control to switch to the AUX LINE in mode, Line will be displayed on the screen. 2.Connect this unit AUX inserting jack and the device Earphone jack by provided AUX cable (included) Once connected,turn on your external device . 3.Once connected,turn on your external device and play music. Insert 6.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
