User Manual
9
• Periodically clean the rubber parts of the spinning rack.
• Thoroughly clean all parts immediately after every use to maintain the performance of
the product.
• After operation, please press switch “R” for 2 - 3 seconds before disassembling and
cleaning.
• Do not use harsh chemicals or abrasives to clean the parts of the juicer.
• Never clean the parts in a dishwasher as
• Rubber plug located in bottom of juicing jug need to clean properly after use. (Refer to
Page 7 “INSTALLATION OF RUBBER PLUG”)
Problem Possible Cause What To Do
No function of juicer.
Juicer is not plugged in.
Check the juicer is plugged in.
Incorrect assembly. Re-assemble the juicer as per
the instructions. Ensure the lid
is locked correctly.
The motor has stopped.
There is a blockage in
the juicing jug.
Press the reverse button to
clear the blockage.
The motor has cut out
due to over-use.
Switch off, unplug and allow
to cool down for 10 minutes
before using again.
Leaking underneath
the juicing j ug.
The rubber plug is not
correctly inserted.
Remove all parts and check
the position of the rubber plug.
Staining on parts. This is the natural color
from juice.
This is normal. To reduce
discolouration, ensure you
rinse and clean the appliance
immediately after use.
Squeaking noise when
j uicing.
Friction between the
squeezing screw and
juicing jug or food /
fruit.
The squeaking sound is
perfectly normal. Do not operate
the juicer without any ingredents.
Too much pulp coming
out with j uice.
There is excess
food / fruit in the juicing
jug
clogging the strainer.
Cut food / fruit, especially
fibrous food into smaller
pieces.
Model No.: GSJ15DG
Voltage: 220-240V
Frequency: 50/60Hz
Power: 150W
Product dimension: 410(H) x 165(W) x 210(D) mm
* The nal product specication may be varied according to a different lot of
material and actual input voltage power of the usage area.