User Manual
7
6. Lock the hopper to the top of the jug, aligning the arrows on the hopper and the jug
as below diagrams.
Twist the hopper in clockwise direction on juicing jug until both arrows are locked in right
position.
There is a safety switch to protect the user. The unit will only start operation when the
hopper is locked in place.
*Clockwise direction = locked
Anti-clockwise direction = unlocked
Pull out the rubber plug slightly and clean. After clean, re-install the rubber plug according
to the diagram below.
1. Pull out the rubber plug by clockwise direction from the channel of pulp outlet which
located in bottom of juicing jug. (Pic.1)
2. After cleaning, insert the rubber plug into channel of pulp outlet to anti-clockwise direction.
(Pic.2)
3. Make sure the channel of pulp outlet is closed tightly. (Pic.3)
The rubber plug must be placed correctly. Otherwise, the jug will have leakage
problem.
(Pic.3)(Pic.2)(Pic.1)