Full Product Manual
5
control is turned all the way counterclockwise, no eects signal is present
in the sum signal of the mixing console.
instruments or other signal sources that do not require any processing.
via the CTRL ROOM OUT. This provides an easy way to monitor signals
coming back from tape to ensure that they are recording correctly.
monitor speaker(s), press the EFF TO CTRL switch. Now the signal of the
eects processor can be monitored alone, and the main mix and/or CD/
tape signal is no longerpresent on the phone and control room outputs.
CTRL RM outputs.
3. DSP DIGITAL REVERB EFFECT ENGINE
26. The EFF TO MAIN control feeds the effects signal into the main mix. If the
27. When the 2TK TO MIX switch is depressed , the 2-track input is assigned
to the main mix providing an additional input for tape machines, electronic
28. Press the 2TK TO CTRL RM switch if you want to monitor the 2-track input
29. If you want to monitor only the effects signal in your headphones or
30. Use the MAIN fader to set the overall volume level of your mixer.
31. The PHONES/CTRL RM control adjusts the level of both headphones and