Full Product Manual
4
GEM-12USB
PORTABLE MIXING CONSOLE
master signal. Once an eects mix is created, the processed signal can then
be routed from the eects device outputs back into a stereo input.
12. The EFF SEND control adjusts the volume level of the EFF signal provided
at connector EFF SEND.
the connector panel) is where headphones are connected. The unbalanced
signals as well as soloed channel signals. The PHONES/CONTROLROOM
control in the main section adjusts the level Of both headphones and main
monitor outputs.
Vol+/Next Press once to skip to next song. Press and hold for volume up.
Vol-/Prev Press once to song skip to prev song. Press and hold for
volume down.
appears here at a Level of 0 dBu. The Main Mix fader adjusts the volume of
these outputs.
switch activates the phantom power supply on the XLR connectors of all
mono channels.
14. PHONES/CTRL ROOM OUT The stereo PHONES connector (at the top of
CTRL ROOM OUT connectors carry the summed effects and main mix
The unbalanced CTRL ROOM OUT jacks carry the summed effects and
main mix signals. The PHONES/CTRL RM control adjusts the level of both
headphones and CTRL ROOM OUT.
16. USB Jack
Long press this key until the indicator flashes. Then turn on your
device's bluetooth, search until the bluetooth link of the mixer appears and
select to connect device.
17. The -10dB switch will pad the input by -10dB. Activate if line signal is coming
in too hot.
19. REC OUT These connectors are wired in parallel with the MAIN OUT and
carry the main mix signal (unbalanced). Connect the 2-TRACK OUTPUT to
the inputs of your recording device. The output level is adjusted via the
high-precision Main Mix fader or rotary control.
The MAIN OUT connectors are unbalanced mono jacks. The main mix signal
22. The red +48V LED lights up when phantom power is on. The PHANTOM
24. Level indicator: The high-precision 4-segment display accurately displays the
relevant signal level.
25. The EFF SEND control adjusts the volume level of the EFF signal provided
at connector EFF SEND JACK.
15.
23. DSP FX Selection
18. 2TK RET The 2-TRACK INPUTS are used to bring an external signal source
(e.g. CD player, tape deck, etc.) into the console.
Play/Pause
20-21.