Operation Manual

P
age
13
of
57
W
ireless
Router
Chapter 3 Network Setting and Software Installation
3.1 TCP/IP Configuration
1. Click Start button and choose Settings, then click Control
Panel.
2. Double click Network icon and select Configuration tab in
the Network window.
3. Click Add button to add network component into your PC.
4. Double click Protocol to add TCP/IP protocol.
5. Select Microsoft item in the manufactures list. Add choose
TCP/IP in the Network Protocols. Click OK button to return to
Network window.
6. The TCP/IP protocol shall be listed in the Network window.
Double click TCP/IP to set the TCP/IP protocol.
7. Select Obtain an IP address automatically in the IP
Address tab.
8. Click OK to complete the install procedure and restart your PC
to enable the TCP/IP protocol.