User manual

EGM-PWM-LAN ENERGY METER WITH LAN INTERFACE

All brands and logos are registered trademarks of their respective owners

7. Power Manager

Your EGM-PWM-LAN has an offline and an online working

mode.

It is “offline” whenever it is not connected to a PC, or when the PC is

turned off. The device will come “online” automatically when it is

connected to a PC with the Power Manager software running. In this

mode the software keeps downloading the power readings from the

EGM-PWM-LAN into a database. In the offline mode the EGM-PWM-LAN

will only save Energy consumption data (kWh), which will be logged into

the database when the device comes online again. The measured data

can be viewed and analysed with the Power Manager software. The

software shows different energy characteristics changing over time –

including the money spent and the power consumption (kWh). When the

software is started, the main power manager window will appear, which

shows a list of all connected devices (see Figure #12 above).

Push the Device settings button (bottom right here) to set the device-

specific options (see Figure #13 above)

In the settings screen you are able to change the name of your

device (in the Name field) and the data downloading frequency (in the

Measurement reading period field) - from 2 to 10 seconds.

To delete all previous recorded data, just push the Clear database

button.

Note: Device IP, Port and Enabled fields will be grey – these

functions are only available on the LAN version of the EGM-PWM-LAN