User manual

5
EG-SSWS3-01
Smart switching wireless socket set, 3 channel, Shuko, 16 A
All brands and logos are registered trademarks of their respective owners
OPERATION
 Plug the device you want to remotely operate in a
receiver.
 Press the relevant ON or OFF button on the
remoter to operate the plug or
 Directly press ON-OFF button on the receiver to
operate the receiver socket.
 Press ALL ON or ALL OFF button on the remoter to
operate all of receiver sockets
HOW TO DECODE
 Press ON-OFF button on receiver for 3 seconds. After the LED flashes
from quickly to once per second, decoding is successful.
 Press ALL OFF switch on remoter for 3 seconds. After the LED flashes
from quickly to once per second, decoding is successful.
TROUBLE SHOOTING
If the socket does not respond to the remoter operation, it can be due to:
 Low battery on the remote – Replace it.
 Distance too large between the remoter and the receiver.
 The pressing time on buttons must be at least 2 seconds.