User Manual

Settings menu
Switching between Video-, Photo- and System setup
Press the POWER key to switch the camera on, it is now in standby mode. To open the settings
menu, just press the “M” key. Press the “OK” key to switch between different menus
(video/photo/system). Within a selected menu you can use the “<-/+>” keys to select menu items
and press “OK” to confirm. Press the MENU (M) key to back to the previous menu.
1. Video setup menu
Press the “M” key to open the settings menu. Video settings will be selected by default.
Press the “<-/+>” key to choose the option to be set up as follows and then press the
OK key to confirm.
 Resolution: select 1920*1080 (30 fps) or 1280*720 (60 fps).
 Loop record: When this option is switched off, each video segment will be 30 minutes
long and the camera will keep recording until the SD card is full without deleting the
previous files recorded. When this option is switched on, each video segment will be 15
minutes long and the camera will keep recording until you press the record button, or when
the camera is turned off. If the SD card is full, the camera will overwrite the previous files
recorded, starting with the oldest recording.
 Date stamp: Turn on/off the use of a date stamp in you videos
 Exposure value: Depending on the recording environment, select
EV-2.1…EV-+0.0…EV-+2.1, etc..
2. Photo setup menu
Press the “M” key to open the settings menu and press OK once to switch to the photo menu. Press
the “<-/+>” key to choose the option to be set up as follows and then press the OK key
to confirm.
 Resolution: 2M by default.
 Single shot: When this option is switched on, the camera will take one picture at a time.
When enabled, all possible other settings (e.g. triple mode, continuous mode and self-timer)
will automatically be switched OFF. When either triple mode, continuous mode or
self-timer mode is turned on, the single shot photo mode will be automatically switched
off.
 Triple shot: When this option is switched on, the camera will take three (3) pictures at a
time. When enabled, all possible other settings (e.g. single mode, continuous mode and
self-timer) will automatically be switched OFF. When either single mode, continuous
mode or self-timer mode is turned on, the triple shot photo mode will be automatically
switched off.
 Self-timer: When this option is set as 5s or 10s, you may enter the self-timer mode; in such
case, single mode, continuous mode and triple mode are inactive and automatically trip to
OFF. In self-timer mode, press the shooting key, the camera will delay 5s or 10s to take
one picture. When any of single mode, continuous mode and triple mode is on, the
self-timer mode will be automatically off.
 Continuous: This option allows the camera to take one picture every 2s, 3s, 5s, 10s, 20s,
30s or 60s until the card is full or when you stop the process by pressing the “<-”key.
When enabled, all possible other settings (e.g. single mode, triple mode and self-timer)