User's Manual

TC65 Hardware Interface Description
Strictly confidential / Draft
s
TC65_HD_V00.450 Page 7 of 96 20.04.2005
0 Document History
Preceding document: "TC65 Hardware Interface Description" Version 00.302
New document: "TC65 Hardware Interface Description" Version 00.450
Chapter What is new
Throughout
manual
IGT line needs to be driven low for at least 400ms
2.1 Updated description of I
2
C and SPI.
3.1 New chapter: Operating Modes
3.3.1 Added remarks on different operating modes.
3.3.3.3 Added remark on shutdown threshold in IDLE mode.
3.5.2 New chapter to describe requirements to control end of charging.
3.5.4 Updated recommended battery specifications.
3.5.7 Added remark on how to switch the module off when in Charging-only mode.
3.6 New chapter: Summary of State Transitions (Except SLEEP Mode)
3.12 More detailed description of AT^SSPI.
3.14.1 Updated forward time of SYNC signal during transmit burst.
5.2 Added remark on temperature tolerances.
5.3 Renamed pins of I2C and SPI.
5.4 Changed table “Current consumption during transmit burst”