User's Manual
Table Of Contents
- Document History
- Introduction
- Product Concept
- Application Interface
- Operating Modes
- Power Supply
- Power Up / Power Down Scenarios
- Automatic GPRS Multislot Class Change
- Charging Control
- Summary of State Transitions (Except SLEEP Mode)
- RTC Backup
- SIM Interface
- Serial Interface ASC0
- Serial Interface ASC1
- USB Interface
- I2C Interface
- Audio Interfaces
- Control Signals
- Antenna Interface
- Electrical, Reliability and Radio Characteristics
- Mechanics
- Sample Application
- Reference Approval
- Appendix
TC63 Hardware Interface Description
Strictly confidential / Draft
s
TC63_HD_V00.432 Page 21 of 97 11.05.2005
3 Application Interface
TC63 is equipped with an 80-pin board-to-board connector that connects to the external
application. The host interface incorporates several sub-interfaces described in the following
chapters:
• Power supply - see Section 3.2
• Charger interface – Section 3.5
• SIM interface - see Section 3.8
• Serial interface ASC0 - see Section 3.9
• Serial interface ASC1 - see Section 3.10
• Serial interface USB - see Section 3.11.
• Serial interface I²C - see Section 3.12
• Two analog audio interfaces - see Section 3.13
• Digital audio interface (DAI) - see Section 3.13 and 3.13.4
• Status and control lines: IGT, EMERG_RST, PWR_IND, SYNC - see Table 17