User's Manual
Table Of Contents
Cinterion
®
PLAS9-X Hardware Interface Overview
5.4 Compliance with FCC and IC Rules and Regulations
32
PLAS9-X_HIO_v00.044 2017-09-19
Confidential / Preliminary
Page 31 of 39
5.4 Compliance with FCC and IC Rules and Regulations
The Equipment Authorization Certification for the Gemalto M2M modules reference application
described in Section 5.3 will be registered under the following identifiers:
•PLAS9-X:
FCC Identifier QIPPLAS9-X
Industry Canada Certification Number: 7830A-PLAS9X
Granted to Gemalto M2M GmbH
Manufacturers of mobile or fixed devices incorporating PLAS9-X modules are authorized to
use the FCC Grants and Industry Canada Certificates of the PLAS9-X modules for their own
final products according to the conditions referenced in these documents. In this case, the FCC
label of the module shall be visible from the outside, or the host device shall bear a second label
stating "Contains FCC ID: QIPPLAS9-X" and accordingly “Contains IC: 7830A-PLAS9X“. The
integration is limited to fixed or mobile categorized host devices, where a separation distance
between the antenna and any person of min. 20cm can be assured during normal operating
conditions.
For mobile and fixed operation configurations the antenna gain, including cable loss, must not
exceed the limits listed in the following Table 9 for FCC and IC.
IMPORTANT:
Manufacturers of portable applications incorporating PLAS9-X modules are required to have
their final product certified and apply for their own FCC Grant and Industry Canada Certificate
related to the specific portable mobile. This is mandatory to meet the SAR requirements for por-
table mobiles (see Section 5.2 for detail).
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Table 9: Antenna gain limits for FCC and IC (TBD.)
Maximum gain in operating band FCC limit IC limit Unit
Band12, Band13, Band 29 700MHz (LTE) dBi
Band 5, 850MHz (GSM/WCDMA/LTE) dBi
Band 4, 1700MHz (WCDMA/LTE) dBi
Band 2, 1900MHz (GSM/WCDMA/LTE) dBi