User's Manual

PHS8-P Hardware Interface Overview
8 Reference Approval
39
PHS8-P_HIO_v01.000 Page 38 of 41 2011-11-10
Confidential / Released

8 Reference Approval
8.1 Reference Equipment for Type Approval
The Cinterion Wireless Modules reference setup submitted to type approve PHS8-P is shown
in the following figure
1
. The module (i.e., the evaluation module) is connected to the DSB75 via
a special adapter and either mounted directly onto the adapter or connected using a flex cable:
Figure 11: Reference equipment for type approval
1.
For RF performance tests a mini-SMT/U.FL to SMA adapter with attached 6dB coaxial attenuator is cho-
sen to connect the module directly to the GSM/UMTS/GPS test equipment instead of employing the SMA
antenna connectors on the PHS8-P-DSB75 adapter as shown in Figure 11. The following products are
recommended:
Hirose SMA-Jack/U.FL-Plug conversion adapter HRMJ-U.FLP(40)
(for details see see http://www.hirose-connectors.com/ or http://www.farnell.com/
Aeroflex Weinschel Fixed Coaxial Attenuator Model 3T/4T
(for details see http://www.aeroflex.com/ams/weinschel/pdfiles/wmod3&4T.pdf)
DSB75
Standard
80 polig Flex
PC
GSM/UMTS
test equipment
GPS
test equipment
GSM/UMTS
RS232
cable
USB
cable
Audio
test equipment
Votronic
handset
Power
supply
COM1
(ASC0)
Power
GND
USB
ANT3
ANT2
ANT1
Audio
Uranus
Audio
DSB75 adapter
SIM card
holder
PHS8
evaluation
module
Hirose U.FL RF connector
manually soldered to Pogo pads
Detail:
H
i
r
o
s
e
U
.
F
L
c
a
b
l
e
UMTS DRX
GPS
I
f
u
s
i
n
g
a
n
a
l
o
g
a
u
d
i
o
PHS8
evaluation
module