User's Manual

PH8/PH8-P Hardware Interface Overview
8 Reference Approval
44
PH8_PH8-P_HD_v02.000 Page 43 of 46 2011-10-21
Confidential / Released

8 Reference Approval
8.1 Reference Equipment for Type Approval
The Cinterion Wireless Modules reference setup submitted to type approve PH8/PH8-P is
shown in the following figure
1
. The module is connected to the DSB75 via a special adapter
and either mounted directly onto the adapter or connected using a flex cable:
Figure 15: Reference equipment for type approval
1.
For RF performance tests a mini-SMT/U.FL to SMA adapter with attached 6dB coaxial attenuator is cho-
sen to connect the module directly to the GSM/UMTS/GPS test equipment instead of employing the SMA
antenna connectors on the PH8/PH8-P-DSB75 adapter as shown in Figure 15. The following products
are recommended:
Hirose SMA-Jack/U.FL-Plug conversion adapter HRMJ-U.FLP(40)
(for details see see http://www.hirose-connectors.com/ or http://www.farnell.com/
Aeroflex Weinschel Fixed Coaxial Attenuator Model 3T/4T
(for details see http://www.aeroflex.com/ams/weinschel/pdfiles/wmod3&4T.pdf)