User's Guide

MC55i-W Hardware Interface Overview
7.2 Compliance with FCC Rules and Regulations
30

MC55i-W_HIO_v01.301 Page 30 of 30 2011-3-8
Confidential / Released
7.2 Compliance with FCC Rules and Regulations
The Equipment Authorization Certification for the Cinterion Wireless Modules reference appli-
cation described in Section 7.1 will be registered under the following identifiers:
FCC Identifier: QIPMC55I-W
Industry Canada Certification Number: 7830A-MC55IW
Granted to Cinterion Wireless Modules GmbH
Manufacturers of mobile or fixed devices incorporating MC55i-W modules are authorized to
use the FCC Grants and Industry Canada Certificates of the MC55i-W modules for their own
final products according to the conditions referenced in these documents. In this case, the FCC
label of the module shall be visible from the outside, or the host device shall bear a second label
stating "Contains FCC ID QIPMC55I-W", and accordingly "Contains IC 7830A-MC55IW".
IMPORTANT:
Manufacturers of portable applications incorporating MC55i-W modules are required to have
their final product certified and apply for their own FCC Grant and Industry Canada Certificate
related to the specific portable mobile. This is mandatory to meet the SAR requirements for por-
table mobiles (see Section 1.3.2 for detail).
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.