User's Manual
Table Of Contents
- Contents
- Figures
- Tables
- Document History
- Introduction
- Product concept
- Application Interface
- Antenna interface
- Electrical, reliability and radio characteristics
- Mechanics
- Reference Approval
- List of parts and accessories
MC46 Hardware Interface Description
DRAFT
MC46_HD_V02.8xb Page 96 of 98 21.08.2003
7.2 Compliance with FCC Rules and Regulations
The FCC Equipment Authorization Certification for the MC46 reference application described
in Chapter 7.1 will be listed under the
FCC identifier QIPMC45,
granted to Siemens AG.
The MC46 reference application registered under the above identifier is certified to be in
accordance with the following Rules and Regulations of the Federal Communications
Commission (FCC).
“This device is to be used only for mobile and fixed applications. The antenna(s) used
for this transmitter must be installed to provide a separation distance of at least 20 cm
from all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter. Users and installers must be provided with antenna installation
instructions and transmitter operating conditions for satisfying RF exposure
compliance.
This device is approved as a module to be installed in other devices. Each OEM must
obtain their own Certification for each device containing this module.”
IMPORTANT: Manufacturers of mobile, fixed or portable devices incorporating MC46
modules are advised to clarify any regulatory questions and to have their completed product
tested and approved for FCC compliance.