User's Manual
Table Of Contents
- Contents
- Figures
- Tables
- Document History
- Introduction
- Product concept
- Application Interface
- Antenna interface
- Electrical, reliability and radio characteristics
- Mechanics
- Reference Approval
- List of parts and accessories
MC46 Hardware Interface Description
DRAFT
MC46_HD_V02.8xb Page 7 of 98 21.08.2003
0 Document History
Preceding document: "MC46 Hardware Interface Description" Version 02.8xa
New document: "MC46 Hardware Interface Description" Version 02.8xb
7.2 96 Added chapter related to FCC certification.
3.4 35 More detailed description of GPRS Multislot Class change.
Preceding document: "MC46 Hardware Interface Description" Version 02.8x
New document: "MC46 Hardware Interface Description" Version 02.8xa
3.3.2.1 31 To keep /EMERGOFF pin and output pins of the serial interfaces from
floating when in high impedance state use additional resistors.
3.3.2.3 32 Added example when /EMERGOFF might be needed.
3.12.2.2 60 LED mode of the SYNC pin recommended for testing and evaluating product
design.
3.12.2.3 61 Recommendations for utilizing /RING0 line added.
4.1.1 65 More detailed information on how to connect the antenna ground pad.
5.4.1 77 More detailed description of current consumption during transmit burst.
Added Smith chart.
5.3 71ff Table 27 - /EMERGOFF pin and output pins of serial interface: To keep
output pins from floating when in high impedance state use additional
resistors.
5.6 83f Table 34: Channel numbers of GSM 850 MHz frequency band corrected.