User's Manual
Table Of Contents
- Contents
- Figures
- Tables
- Document History
- Introduction
- Product concept
- Application Interface
- Antenna interface
- Electrical, reliability and radio characteristics
- Mechanics
- Reference Approval
- List of parts and accessories
MC46 Hardware Interface Description
DRAFT
MC46_HD_V02.8xb Page 44 of 98 21.08.2003
After the last character was sent or received the interface will remain active for another
· 2 seconds, if AT+CFUN=5 or 7 or
· 10 minutes, if AT+CFUN=6 or 8.
In the pauses between listening to paging messages, while /CTS is high, the module
resumes power saving and the AT interface is not accessible. See Figure 10 and Figure 11.
2.12 s
4.6 ms
4.6 ms
4.6 ms
4.6 ms
2.12 s
2.12 s
/CTS
AT interface disabled
AT interface enabled
Paging message Paging message Paging message
Paging message
4.6
ms
4.6
ms
4.6
ms
4.6
ms
Figure 10: Timing of /CTS signal (example for a 2.12 s paging cycle)
Figure 11 illustrates the CFUN=5 and CFUN=7 modes, which reset the /CTS signal 2
seconds after the last character was sent or received.
2.12 s
4.6 ms
2 s
4.6 ms
4.6 m
s
2.12 s
2.12 s
/CTS
AT interface disabled
AT interface enabled
1 character
st
Last character
Beginning of power saving
Paging message Paging message
Paging message
Paging message
4.6
ms
4.6
ms
Figure 11: Beginning of power saving if CFUN=5 or 7