User's Manual

MC46 Hardware Interface Description
Confidential / Released
s
mo b i l e
MC46_HD_V03.05 Page 97 of 99 13.11.2003
7.2 Compliance with FCC Rules and Regulations
The FCC Equipment Authorization Certification for the MC46 reference application described
in Chapter 7.1 is listed under the
FCC identifier QIPMC46,
granted to Siemens AG.
The MC46 reference application registered under the above identifier is certified to be in
accordance with the following Rules and Regulations of the Federal Communications
Commission (FCC).
“This device contains GSM 1800MHz function that is not operational in U.S. Territories.
This device is to be used only for mobile and fixed applications. The antenna(s) used
for this transmitter must be installed to provide a separation distance of at least 20 cm
from all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter. Users and installers must be provided with antenna installation
instructions and transmitter operating conditions for satisfying RF exposure com-
pliance. Antennas used for this OEM module must not exceed 7dBi (GSM 1900) and
1.4dBi (GSM 850) gain for mobile and fixed operating configurations. This device is
approved as a module to be installed in other devices.
Each OEM must obtain their own Certification for each device containing this module.”
IMPORTANT: Manufacturers of mobile or fixed devices incorporating MC46 modules are
advised to
· clarify any regulatory questions,
· have their completed product tested,
· have product approved for FCC compliance, and
· include instructions according to above mentioned RF exposure statements in end
product user manual.