User's Manual

HC25 Hardware Interface Overview
6.3 Board-to-Board Application Connector
30
s
HC25_HO_v00.220 Page 30 of 39 2007-03-20
Confidential / Preliminary
A recommended corresponding board-to-board connector series for external applications is:
Supplier: Hirose ( www.hirose.com
)
Type: DF12x-50DP-0.5V (SlimStack Header)
Height: 3.0 – 5.0 mm
For Hirose sales contacts see Chapter 8.
Note: There is no inverse polarity protection for the board-to-board connector. It is therefore
very important that the board-to-board connector is connected correctly to the host application,
i.e., pin1 must be connected to pin1, pin2 to pin 2, etc. Pin assignments are listed in Section
5.5, pin locations are shown in Figure 6.
Figure 8: Mechanical dimensions of the board-to-board connector