User's Manual

GWM400 Product Technical Specification and User Guide
4.4 Antenna Interface
30
 GWM400_HID_v02 2017-07-05
Confidential / Prelimenary
Page 29 of 38
4.4 Antenna Interface
Table 15 lists RF antenna interface specifications for the GWM400. Please note that the spec-
ified conditions may not apply to or be supported by all terminals.
Table 15: RF Antenna interface UMTS/LTE
Parameter Conditions Min. Typical Max. Unit
UMTS/HSPA connectivity Band I,V,VIII
Receiver Input Sensitiv-
ity@ARP
UMTS 2100 Band I -106.7 dBm
UMTS 850 Band V -106.7 dBm
UMTS 900 Band VIII -103.7 dBm
UMTS Maximum TX Power
1
1. RF Power@ ARP with 50 Ohm Load, ambient temperature 25°C
UMTS 2100 Band I 21 23 - dBm
UMTS 850 Band V 21 23 - dBm
UMTS 900 Band VIII 21 23 - dBm
LTE connectivity Band 3, 5, 8, 28
LTE Receiver Input Sensitiv-
ity (5 MHz@ ARP, single
antenna)
LTE FDD 1800 Band 3 -96.3 -98 dBm
LTE FDD 850 Band 5 -97.3 -100 dBm
LTE FDD 900 Band 8 -96.3 -100 dBm
LTE FDD 700 Band 28 -97.8 -98 dBm
LTE Maximum TX Power
2
2. Power @ ARP with 50Ohm Load ambient temperature 25°C, 5MHz BW, 1R, Position Low
LTE FDD 1800 Band 3 +21 +22.5 dBm
LTE FDD 850 Band 5 +21 +22.5 dBm
LTE FDD 900 Band 8 +21 +22.5 dBm
LTE FDD 700 Band 28 +21 +22.5 dBm