User's Manual
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 Sample Application
- 3 Operating Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
ELS31-/ELS51-US Hardware Interface Overview
5.3 Reference Equipment for Type Approval
38
ELS31-US_ELS51-US_HIO_v01.000a 2016-12-28
Confidential / Preliminary
Page 36 of 46
5.3 Reference Equipment for Type Approval
The Gemalto M2M reference setup submitted to type approve ELS31-US/ELS51-US (including
a special approval adapter for the DSB75) is shown in the following figure
1
:
Figure 16: Reference equipment for Type Approval
1. For RF performance tests a mini-SMT/U.FL to SMA adapter with attached 6dB coaxial attenuator is cho-
sen to connect the evaluation module directly to the GSM/UMTS test equipment instead of employing
the SMA antenna connectors on the ELS31-US/ELS51-US-DSB75 adapter as shown in Figure 16. The
following products are recommended:
Hirose SMA-Jack/U.FL-Plug conversion adapter HRMJ-U.FLP(40)
(for details see see http://www.hirose-connectors.com/ or http://www.farnell.com/
Aeroflex Weinschel Fixed Coaxial Attenuator Model 3T/4T
(for details see http://www.aeroflex.com/ams/weinschel/pdfiles/wmod3&4T.pdf)
Antenna
GSM / GPRS / UMTS
Antenna with 1m cable
ASC0
PC
Power
supply
LTE
Base station
DSB75
ASC1
USB
Approval adapter for
DSB75
SMA
Evaluation module
ELS31
ELS51
USB
Evaluation module
ELS31
ELS51
SIM card
Top view
Bottom view