User's Manual

Cinterion
®
ALS6A-E Hardware Interface Overview
2.1 Key Features at a Glance
18
 ALS6A-E_HIO_H_v01.270a 2015-03-10
Confidential / Released
Page 17 of 36
Emergency-off Emergency-off by hardware signal EMERG_OFF if IGT is not active
Special Features
Antenna SAIC (Single Antenna Interference Cancellation) / DARP (Downlink
Advanced Receiver Performance)
Rx Diversity (receiver type 3i - 64-QAM) / MIMO
GPIO 10 I/O pins of the application interface programmable as GPIO.
Programming is done via AT commands.
GPIOs can be configured for antenna diagnosis.
ADC inputs Analog-to-Digital Converter with two unbalanced analog inputs for (exter-
nal) antenna diagnosis.
Evaluation kit
Evaluation module ALS6A-E module soldered onto a dedicated PCB that can be connected
to an adapter in order to be mounted onto the DSB75.
DSB75 DSB75 Development Support Board designed to test and type approve
Gemalto M2M modules and provide a sample configuration for applica-
tion engineering. A special adapter is required to connect the ALS6A-E
evaluation module to the DSB75.
Feature Implementation