User's Manual

Cinterion
®
ALS1-US Hardware Interface Overview
2.2 ALS1-US System Overview
16
 ALS1-US_HIO_v01.000 2013-08-14
Confidential / Preliminary
Page 16 of 34
2.2 ALS1-US System Overview
Figure 1: ALS1-US system overview
Evaluation kit
Evaluation module ALS1-US module soldered onto a dedicated PCB that can be connected
to an adapter in order to be mounted onto the DSB75.
DSB75 DSB75 Development Support Board designed to test and type approve
Gemalto M2M and provide a sample configuration for application engi-
neering. A special adapter is required to connect the ALS1-US evaluation
module to the DSB75.
Feature Implementation
GPIO ADC UICC
Power
supply
IGT,
Emergency Off
Net state/
status
SIM
card
Host application
On/Off
Module
Application
Power indication
(PWR_IND)
GSM/UMTS/LTE
Power for application
(VEXT)
USB
GSM/UMTS/LTE
Antenna diversity
12
Antenna
diagnostic
Antenna
switch
2x
GPIO
2x
ADC