User's Manual

Cinterion
®
ALAS6A-US Hardware Interface Overview
5.4 Compliance with FCC and IC Rules and Regulations
33
 ALAS6A-US_HIO_v00.130a 2016-09-28
Confidential / Preliminary
Page 32 of 40
5.4 Compliance with FCC and IC Rules and Regulations
The Equipment Authorization Certification for the Gemalto M2M modules reference application
described in Section 5.3 will be registered under the following identifiers:
• ALAS6A-US:
FCC Identifier QIPALAS6A-US
Industry Canada Certification Number: 7830A-ALAS6AUS
Granted to Gemalto M2M GmbH
Manufacturers of mobile or fixed devices incorporating ALAS6A-US modules are authorized to
use the FCC Grants and Industry Canada Certificates of the ALAS6A-US modules for their own
final products according to the conditions referenced in these documents. In this case, the FCC
label of the module shall be visible from the outside, or the host device shall bear a second label
stating "Contains FCC ID: QIPALAS6A-US" and accordingly “Contains IC: 7830A-
ALAS6AUS“. The integration is limited to fixed or mobile categorized host devices, where a
separation distance between the antenna and any person of min. 20cm can be assured during
normal operating conditions.
For mobile and fixed operation configurations the antenna gain, including cable loss, must not
exceed the limits listed in the following Table 10 for FCC and IC.
IMPORTANT:
Manufacturers of portable applications incorporating ALAS6A-US modules are required to
have their final product certified and apply for their own FCC Grant and Industry Canada Cer-
tificate related to the specific portable mobile. This is mandatory to meet the SAR requirements
for portable mobiles (see Section 5.2 for detail).
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Table 10: Antenna gain limits for FCC and IC
Maximum gain in operating band FCC limit IC limit Unit
Band12, 700MHz (LTE) 10.2 7.1 dBi
Band 5, 850MHz (GSM/WCDMA/LTE) 4.0 0.7 dBi
Band 4, 1700MHz (WCDMA/LTE) 12.5 8.8 dBi
Band 2, 1900MHz (GSM/WCDMA/LTE) 9.5 6.0 dBi