User's Manual

Cinterion
®
AGS2-E Hardware Interface Overview
2.1 Key Features at a Glance
18
 AGS2-E_HIO_v00.021 2014-03-20
Confidential / Preliminary
Page 17 of 40
GPIO interface GPIO interface with 4 GPIO lines. The GPIO interface is shared with a
PWM functionality as well as a fast shutdown signal, an antenna detection
line and a jamming indicator
I
2
C interface Supports I
2
C serial interface
GPS 1pps clock High accuracy 1pps output (one pulse per second) signal
Antenna 50
Power on/off, Reset
Power on/off Switch-on by hardware signal IGT
Switch-off by AT command (AT^SMSO)
Automatic switch-off in case of critical temperature and voltage conditions.
Reset Orderly shutdown and reset by AT command
Special features
Real time clock Timer functions via AT commands
Phonebook SIM and phone
TTY/CTM support Integrated CTM modem
TLS security Transport layer security
eCall EU eCall prepared
RLS monitoring Jamming detection
Miscellaneous Prepared for under-fill
Automotive grade service levels
Automotive test specification
No repair
E-marking
Evaluation kit
Evaluation module AGS2-E module soldered onto a dedicated PCB that can be connected to
an adapter in order to be mounted onto the DSB75.
DSB75 DSB75 Development Support Board designed to test and type approve
Gemalto M2M modules and provide a sample configuration for application
engineering. A special adapter setup is required to connect the evaluation
module to the DSB75.
Feature Implementation