Certifications 2

Hazardous combustion products: Carbon oxides
Silcon oxides
Formaldehyde
Metal oxides
Specific extinguishing methods: Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment. Use water spray to cool unopened containers. Remove
undamaged containers from fire area if it is safe to do so. Evacuate area.
Special protective equipment: Wear self-contained breathing apparatus for firefighting if necessary. Use
personal protective equipment.
6. Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: Follow safe handling advice
and personal protective equipment recommendations.
Environmental precautions: Discharge into the environment must be avoided. Prevent further leakage or
spillage if safe to do so. Retain and dispose of contaminated wash water. Local authorities should be
advised if significant spillages cannot be contained.
Methods and material for containment and cleaning up: Soak up with inert absorbent material. For large
spills, provide diking or other appropriate containment to keep material from spreading. If diked material
can be pumped, store recovered material in appropriate container. Clean up remaining materials from spill
with suitable absorbent. Local or national regulations may apply to releases and disposal of this material,
as well as those materials and items employed in the cleanup of releases. You will need to determine
which regulations are applicable.
7. Handling and Storage
Technical measures : See Engineering under Exposure Controls / Personal Protection section.
Local/ Total ventilation: Use only with adequate ventilation
Advice on safe handling: Handle in accordance with good industrial hygiene and safety practice. Take
care to prevent spills, waste and minimize release to the environment.
Conditions for safe storage: Keep in properly labeled containers. Store in accordance with the
particular national regulations.
Materials to avoid :Do not store with the following product types: Strong oxidizing agents
8. Exposure Controls / Personal Protection
Ingredients with workplace control parameters
Contains no substances with occupational exposure limit values.