Safety data sheet

provide artificial respiration immediately.Obtain immediate medical attention.
Skin: Wash thoroughly with soap and water for minimum of 15 minutes.Contaminated clothing
should be removed immediately. If initation Persists, Obtain medical attention.
Eye Contact:Wash thoroughly with water for minimum of 15 minutes. If irritation Persists.Obtain
medical attention.
Ingestion: Drink 2 large glasses of water.Do not induce vomiting. If a large amount has been ingested,
or if discomfort persists, Obtain medical attention.
Section Ⅴ - Fire Fighting Measures
Fire and Explosion Hazard Data for Matrix
Flash Point:None. Fire Hazard:non-combustible
Auto-Ignition Temperature:N/A LEL:N/A UEL:N/A
Extinguishing Media:standard dry chemical , Carbon dioxide.Water and foam should be used, per
usual techniques.
Section Ⅵ - Accidental Release Measures
Do not touch spilled material.Stop leak,if possible, without personal risk. For small spills,absorb with
sand or other non-combustible materia.collect spilled material in an appropriate container for disposal
according to all applicable local,state and federal regulations.For large spills,dam or dike spill area,
Isolate hazard area and remove all individuals.Pump or soak up material for disposal according to all
applicable local,state and federal regulations.flush any residue to a sanitary sewer, approved for
chemical waste disposal.
Section Ⅶ - Handing and Storage
Store below 70C or 200F ,store in tightly Sealed Container,Do not store under pressure.Store in an
inert atmosphere. Store away from materials.designated incompatible.keet out of reach of children &
animals.No Other Precautions for Handling.
Section Ⅷ - Exposure Controls /Personal Protection
See Seetion 2
Wear chemical goggles.gloves other Protective clothing or Eguipment.None required beyond
standardEquipment.In an occupational environment,provide safety and hygiane equipment consistent
with all applicable local, state & Federal regulations.
Section Ⅸ - Physical and Chemical Properties
Physical Data for Matrix
Melting Point:200F
Boiling Pt:
＞300F
Vapor Pressure:N/A
Vapor Density(AIR=I)
＞1.0
Water Solubility:insoluble.
Appearance and odor: Material is Viscous, gray grease.No particulayordor is associated with material.
SectionⅩ - Stability and Reactivity
Reactivity Data for Matrix
stability: Stable
Incompatibility: Avoid strong acids.strong bases,halogens.