Security Datasheet

Inhalation: If adverse effects occur,proceed to an uncontaminated area.If breathing has
been arrested, provide artificial respiration immediately.Obtain immediate medical
attention.
Skin: No first aid should be needed.
Eye Contact:Wash thoroughly with water for minimum of 15 minutes. If
irritation Persists.Obtain medical attention.
Ingestion: Obtain medical attention.
Section Ⅴ - Fire Fighting Measures
Fire and Explosion Hazard Data for Matrix
Flash Point: 305 °C (Seta Closed Cup)
Flammability:Non-flammable
Auto-Ignition Temperature:N/A
LEL:N/
A
UEL:N/A
Extinguishing Media:standard dry chemical , Carbon dioxide.Water and foam should be
used, per usual techniques
.
Section Ⅵ - Accidental Release
Measures
Personal Precautions: Avoid eye contact. Do not take internally.
Environmental Precautions: Prevent from spreading or entering into drains, ditches or
rivers by using sand, earth or other appropriate barriers.
Methods for Cleaning up: Observe all personal protective equipment recommendations
described in this MSDS. If diked material can be pumped, store recovered material in
appropriate container. Wipe up or scrape up and contain for salvage or disposal. Clean area
as appropriate since spilled materials, even in small quantities, may present a slip hazard.
Final cleaning may require use of steam, solvents or detergents. Dispose of saturated
absorbant or cleaning materials appropriately, since spontaneous heating may occur. Laws
and regulations may apply to releases and disposal of this material, as well as those
materials and items employed in the cleanup of releases. You will need to determine which
laws and regulations are applicable.
Section Ⅶ - Handing and Storage