User manual

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE GEFENTV ETHERNET OVER PLC

• This device passes all 10/100BASE-T Ethernet network protocols (TCP/

IP, NETBUEI, Microsoft Networking, etc.) at speeds of up to 200Mbps (Full

duplex fast Ethernet).

• All devices connected to the sending and receiving nodes must be on the

same power phase to communicate properly.

• Multiple receiving nodes can be used on the same in-house power line

system to extend the network to multiple locations.

• Performance of GefenTV Ethernet Over PLC can be affected by “noisy”

devices on the power lines. This can be alleviated by using a PLC ﬁ lter

(Part# GTV-PLC-FUS for US and GTV-PLC-FEU for Europe). Offending

devices need to be connected to the PLC ﬁ lter before being connected to the

wall outlet.

OPERATION NOTES